What Is a Domestic EPC?
A Domestic EPC (Energy Performance Certificate) is an assessment of the energy efficiency of a residential property carried out by an accredited Domestic Energy Assessor (DEA). The assessment follows the Reduced Data Standard Assessment Procedure (RdSAP) methodology — a simplified version of SAP used for existing dwellings. The resulting certificate rates the property on a scale of A (most efficient) to G (least efficient) and is valid for 10 years.
Domestic EPCs are required in England and Wales whenever a residential property is: built for the first time; sold; or let to a new tenant. For , the EPC must be provided to prospective tenants at the start of marketing and a copy given to the tenant before they move in.
What Does a Domestic Energy Assessor Look For?
During the domestic EPC assessment, the assessor collects data on all the energy-related features of the property. The visit typically takes 30–60 minutes. Here is exactly what is assessed:
Property Details
- Property type (detached, semi-detached, mid-terrace, flat, maisonette, bungalow)
- Number of storeys and rooms
- Age of construction — this determines assumed U-values for walls and roof if no documentary evidence of insulation is available
- Total floor area (measured by the assessor or from floor plans)
Insulation
- Roof/loft insulation: Assessor checks loft access and measures thickness of insulation (mm). No insulation, 25mm, 50mm, 100mm, 150mm, 200mm+ all result in different scores.
- Wall type and insulation: Walls identified as cavity (pre-1920s brick, post-1920s cavity), solid (Victorian), or other. Presence of insulation in cavity walls or internal/external solid wall insulation is recorded.
- Floor insulation: If present and accessible, floor insulation is recorded. Most properties do not have recorded floor insulation.
Heating System
- Main heating fuel: Gas (mains), oil, LPG, electric, heat pump, biomass
- Boiler type and age: Regular, system, combi. Age determines assumed efficiency (A-rated modern boiler vs G-rated old boiler)
- Heating controls: Programmer, room thermostat, TRVs on radiators — each adds SAP points
- Secondary heating: Gas fires, electric heaters, open fires — assessed and added
Hot Water
- Hot water source (combi boiler, stored cylinder, immersion heater, solar thermal)
- Cylinder insulation factor if applicable
Windows and Glazing
- Glazing type (single, double, triple, secondary)
- Approximate age of double glazing (pre-2002 has worse U-value than post-2002)
- Low-E coatings noted if documented
Lighting
- Proportion of light fittings with low-energy bulbs (LEDs or dedicated low-energy fittings)
- This is increasingly significant as older properties often still have traditional light fittings
Renewable Energy
- Solar PV panels — MCS-certified system adds significant SAP points
- Solar thermal (hot water) — reduces hot water energy demand
- Air or ground source heat pumps — high-efficiency rating
- Wind turbines — rare but captured in the assessment
How to Prepare for Your Domestic EPC Assessment
- Gather documentation: Find any certificates for boiler installation (shows boiler age and model), window installation certificates (shows glazing type), solar panel MCS certificates, or insulation guarantees. These can override the age-based assumptions used when no evidence is available.
- Ensure loft access: The assessor will need to access the loft to measure insulation. Clear any obstruction to the loft hatch and ensure the light works or have a torch available.
- Change bulbs to LEDs: A simple improvement before the assessment — swap any remaining incandescent or halogen bulbs to LED equivalents. This can add 1–3 SAP points.
- Ensure access to all rooms: The assessor needs to enter all rooms to measure floor area and assess room characteristics.
- Locate the boiler: The assessor will look at the boiler model number and age. For combination boilers, the model number is usually on the front panel.
Common Ways to Improve Your Domestic EPC Rating
Loft insulation (top up to 270mm)2–4 SAP points
Cavity wall insulation3–5 SAP points
New condensing boiler (replacing old inefficient boiler)5–15 SAP points
Heating controls upgrade (TRVs + programmer + room thermostat)2–4 SAP points
Double glazing (replacing single)2–4 SAP points
LED lighting throughout1–3 SAP points
Solar PV (3kWp)10–20 SAP points
Air source heat pump10–25 SAP points
EPC Prices — Domestic Properties in London
Studio / 1-bed flat£79
2-bedroom property£89
3-bedroom property£99
4-bedroom property£109
5+ bedroom property£119
EPC + Gas Safety Certificate bundleSave £10
EPC + EICR + Gas Safety Certificate bundleSave £30
Book Your Domestic EPC Today
Accredited Domestic Energy Assessors. EPC from £79 inc VAT. Same-day available across London and M25.
📲 Book via WhatsApp
Near Me — Domestic EPC Keywords
Common searches: domestic EPC near me London, energy performance certificate for renting London, EPC assessment home London, cheap EPC certificate London, EPC assessor near me, same-day EPC London, EPC for selling property London, EPC certificate London.
Frequently Asked Questions — Domestic EPC
Does the assessor need access to all rooms?
Yes. The assessor needs to enter all rooms to measure the floor area accurately and check room-specific features. If a room is inaccessible (e.g. locked), the assessor will make a note and may have to make conservative assumptions about that room, which could negatively affect the rating.
Can I choose what improvements to make to improve my EPC?
Yes. The EPC report provides a list of recommended improvements in order of cost-effectiveness. You can choose which improvements to implement based on your budget and priorities. We recommend tackling the highest-impact measures first (usually loft insulation and cavity wall insulation if applicable).
Do I need an EPC for a new build?
Yes. All new dwellings require an EPC on completion. For new builds, a full SAP calculation (rather than RdSAP) is used. The developer is responsible for obtaining the EPC before the property can be sold or let.